Hello

I buy a Mixer Yamaha 124 cx, for the musicans live.
What output is necesary? because xlr is +4 dvu.
and no mono output.

Thanks!

Hi, chema dj!

I would, first of all, suggest that it would be simplest to think of that mixer as an 8 channel mixer, not a 12 channel mixer -- unless you have two L1's and are planning to use them as a stereo pair.

That mixer has 4 "Aux" outputs -- those could be used instead of the "Main" outputs to connect with the L1's.

The simplest way to use the "Main" XLR outputs would be get a couple of -20db 'Pads' to use at the input to the L1's.

With two such 'pads' it is relatively simple to make use of both the L & R channels to allow the use of two different Presets on the L1 -- just pan some of the inputs (such as the vocal mics) all the way Left, and pan the other inputs (e.g.: instruments) all the way to the Right. Then choose the proper Preset for each connection at the L1.

Edit to fix some "typos".

This message has been edited. Last edited by: Dan Cornett,

thanks Dan!