I was having difficulty getting good recording levels from the T1® via USB in the computer.

I solved this by setting the Master Output to Pre-Master Volume.

This sends the full output of the T1® to the USB port regardless of the setting of the Master Volume Control. This allows you to monitor at comfortable levels through your Model II Power Stand while recording at full volume.



You can find full details about how to change the settings in

T1® Audio Engine / Master Output / Pre /Post



Note - this also sends the full output to the T1® Analog Master Output so if you are using that to monitor through a Classic or Model I, things could get very loud. You might want to monitor through the Aux Output instead.

Very helpful info ST, thanks much!