I will be getting my model II with tone match this week. I play fiddle and have a dpa microphone attached to the fiddle. Is there any setting for this mic in the tone match?
It is a wonderful mic that I believe is made in Denmark
You might try the Utility category, Electric Violin preset. Then switch to the zEQ settings to 'fine tune'.
I don't know what EQ the default preset applies, but I suspect that ToneMatch setting will then set the zEQ controls to 'match' the violin's range.
Might also try some of the Audix mic presets, particularly the VX or SCX mics.
|Research & Development|
That's really exciting about your new purchase.
Please be sure to check that you have the latest software in your system. We've made a number of improvements. Here's a link to the firmware updates.
Which dpa microphone do you have. I used one of their headworn mics and we did a Tonematch preset for it. Let me know what model you have on the chance it's the same.
With best regards,
Im using the DPA 4099 g for guitar and took off all of the tone match settings and it sounds awsome. Added a bit of reverb.
|Powered by Social Strata|