I have an L1 model 11 with tonematch. I would like to know how to connect my guitar to my three effects pedals and to my digitech vocalist 4. How about them apples?

Hello - Were you using these pedals before the L1? If so start there. If not what kind of pedals do you have?

Guitar to VL4, Guitar Thru to pedals, then to T1, is a simple way.

The main thing is the VL4 should be first in line, before any effects.

There are other more complex setups that involve two channels on the T1.

The analog in on the Model II powerstand is also an option for the guitar signal after the pedals, unless you need the tone shaping controls on the T1.

Remember the guitar knob on the VL4 controls a signal with some effects on it. Presets 51 thru 100 are preprogrammed and cannot be changed, 01 thru 50 can be edited.

O..

Bonjour Rustleo,

I use my L1 Model II with T1 for a guitar duo, so I need to use only 2 of the 4 channels on the T1. Here is how I am setup:

- guitar (Taylor 310CE) into TC Harmony G (similar to your voice live)
- guitar through, without any effects, into Boss multiple-effects pedal;
- from multiple-effects pedal to Boss RC50 loop station;
- from loop station into T1;
- T1 set to Taylor dreadnought

This works well for us. Experiment to find what you like best.

Bonne année!

Thanks guys. Always lke to check before blowing something up. Just found out about one spot plug in for my three pedals and Vocalist 4, sure makes it easier that plugging in a bunch of cords or running batteries down.
www.soundclick.com/RussellO

The one spot works well with all my pedals but is not suited for the VL4. It requires a different power supply.