I play a Crowdster through the Bose L1 with my acoustic signal going straight through the Tonematch but the humbucker on the Crowdster needs help. Can I use a Vox Tonelab pedal through the Bose L1 to boost and help the signal from my humbucker on the Crowdster...it is a stereo guitar with both piezo and humbucker and blender and eq for each.....
Thanks

The short answer is "yes."

The longer answer is "I have done this very thing with a several hybrid guitars with a peizo and a humbucker pickup."

I sent the signal from the peizo directly to the T1 and dialed up a good acoustic guitar sound.

I sent the signal from the humbucker through the modeler and into another channel of the T1. I then tried several of the electric guitar category presets until I found the one that I liked best.

I then used the blender knob to send the signal to either and both paths which gave me a wide range of acoustic, electric and blended sounds.

Can you tell me which modeler you used that you liked best for the Crowdster. Thanks.