I have just purchased a second L1 model 2 unit, does anyone know if I couls use a cat5 splitter to send the digital signal from my tone match to both powerstands.
Thanks for any advise
Thank you for joining the Forum.
You don't need to use a splitter (and it wouldn't work anyway).
Use the ToneMatch® cable (Cat5) as you have been to the first Model II Power Stand and run a ¼ inch jack Tip-Ring-Sleeve cable from the T1® Master Output
to the second Model II Power Stand Analog input.
On the second Model II Power Stand set the Analog Input trim to "3" and adjust as necessary to balance the sound.
You can also use a ¼ inch jack Tip-Sleeve cable but you may need to turn the trim up higher.
For best results have the Model II Power Stands at least 20 feet apart.
More about that here: Stereo / Mono / Distributed systems
Does that help?
|Powered by Social Strata|