Just bought the T1 and mic stand holder for the T1. I am having problems with the T1 staying on the L shape latch. It keeps coming loose from the bottom. I am thinking about using super glue to make it stay in the groove on the bottom of the T1. Before I do, I thought I check to see if there are any ideas? Thanks
It sounds like you have the bracket upside down. There is a bevel on the arm. It should be angled down toward you (lowest edge toward you) as you are facing it before you put the T1® on top of it.
Does that help?
Yep. Had it backwards. Thanks
Glad this was an easy fix.
Here's a hint. I use the velcro fastener on the the ToneMatch® Cable to secure that cable to the microphone stand. This way, the ToneMatch® cable will act as a safety tether in case the T1® gets knocked off the arm.
Here are some more notes about the T1®.
T1 ToneMatch® Audio Engine
Love my Tonematch but just don't feel comfortable even "correctly" attached to the mike stand. Entertainers move all over a mic stand. Nope.....no way I am gonna see $500 crash to the floor. I bought a simple xstand with a metal tray on top. .....plus I velcro'ed bottom of tonematch and top of stand tray. Nice and snug. Spare me the "but you have to carry another two pieces".
"That's my story and I'm stick'in to it"
'music is neither new or old it just is"
Will you post pic on how you Velcro the t1 to the mic stand?? Thanks
I don't velcro the T1® to the mic stand, I velcro the ToneMatch cable (that locks into the T1®) to the mic stand.
I can't take a picture tonight - everything is packed up for a show - sorry. I hope this will do...
Does that help?
Got it. Thanks.
When you do have time, a pic would be nice.
Sorry to have taken so long to do this. Misplaced my camera.
Hi Joey C.
I started a new discussion thread for your pictures.
Joey C.'s mega stand
|Powered by Social Strata|