Hi
I use two Bose L1 classic systems with 4 bass units(2 per side) I occassionally gig with other musicians and need extra outputs for microphones I need outputs for 4 microphones shure SM58's two guitars and an mp3 player.
I have purchased a six channel unpowered mixer Behringer xenyx 1202 can you advise on the best way to connect this mixer to the tone match engine to enable me to plug in all the microphones.

Hi warreng,

Welcome to the forum!

You can connect the Xenyx's Main Outs to the T1 CH4/5 inputs. Any adjustments made to the T1 CH4/5 trim, EQ, vol, and effects will now affect everything connected to the Xenyx, which is being passed through CH4/5 on the T1.

Alternatively, if you have available inputs on your L1 powerstands, I would suggest leaving your T1 ToneMatch connected as normal and connecting the Xenyx to the available inputs on the powerstands. For example, connect the Xenyx's L Main Out connection to CH4 on the first L1 and connect the Xenyx's R Main Out connection to CH4 on the second L1.

This way, since the levels and EQ for the sources connected to the Xenyx can be set at the Xenyx, you won't have to deal with an additional trim and volume control at the T1 for the Xenyx's output.

Either way will work though.

I hope that helps,