I am producing backing tracks for live use with instruments (minus drums) panned hard right and a click track panned hard left. I was wondering how to best use T1 to route left channel (click track) to my in-ear / monitor? Or is there a better way to route signal without going through T1? Thanks - Dan

Hi Dan,

Just plug the 1/4" cable containing the *click* track into it's own channel on the T1.
Do not turn up that channel's volume control.
Use the Aux Out for that channel to feed the in-ears.

As that Aux out jack is a *balanced*, TRS connection, the click will be hear in both ears.
You will need to monitor the other channels, instruments and mics via the Aux Out as well.

I hope that's clear.

Yes, perfectly clear - Thanks. As a drummer, would you use in-ear monitoring or head phones or floor monitor, if you were using a click track? And if in ear monitor, just one ear? I don't want to be isolated from rest of mix. Or maybe you your saying is mix click track with all of instruments into my monitor? How would I do that? Thanks - Dan