Well i'm back from my first weekend with the 2 L1 4 B1 system. I ran unbalanced 1/4" into chan 1 on both L1's w/preset set to 00.
Everything set completely flat on my board and on the remotes, Gains on both L1's set to about 3 O'clock all knobs on the remote set at noon and board output set at optimum.
Holy Cow Batman! First off the bottom end surprised me (tight well defined but almost perfect for my taste) next I heard a tamborine in a song that I never knew was in the mix...All I had to hear was my wife say "These things are incredible I love them!" She actually got excited about doing a show because of a piece of gear! The only thing I had to do was notch a couple of frequencies just above 1k and it sounded good right out of the box. I did this test in one of the crappiest rooms full of odd angles exposed pipes and ductwork. Another system would have let these imperfections raise their ugly heads...Tile floor and copper ceilings usually mean going as far as pulling out an RTA and calming things down, NOT ANY MORE.
Friday I'll be doing a karaoke show and saturday a wedding at my hardest room a catholic activities center/gym with a stage,block walls peaked 35' steel ceiling/rock maple floor..Let's see what happens.

Question.....Can I use one remote with two systems as the remote looks like it is a midi thru having an imput on the top and bottom?
Somebody let me know before I try plugging this in like this.
#2 can I sub one mb4 in place of two B1's or will the powerbase read this as a problem with the impeadance?

Just freakin' amazed with these things!
This forum is what sold the system, so thanks to all of you!

-Big Dog Karaoke, June 13, 2007

Full Thread Here